Locks
 

Will any lock fit my door?

Most locks come in two sizes: 2-3/8" or 2-3/4" backset. This is how far the center of the hole is away from the edge of the door. The customer needs to know this distance or purchase a lock that has an adjustable backset.
 

Can locks be rekeyed so that more than one uses the same key?

Yes. We can also re-key existing or new locks to the same key. However, they have to be Kwikset or Schlage and use the same key blank.

What is the difference between a single-cylinder and a double-cylinder deadbolt?

A single-cylinder deadbolt is key operated from the outside while a double cylinder is key operated on both sides. They both have their advantages.
 

I have mis-drilled the hole for my doorknob. Is there anything I can do to cover this mistake?

One option is to use a brass door reinforcer. This product will also increase the strength of your door.
 

Is there a product that makes installing a strikeplate easier?

Yes, there is an adjustable strikeplate.
 

Do I need a deadbolt?

These locks provide more security because the deadbolt latch is larger and protrudes farther into the doorframe. It can also be keyed on both sides for additional security.
 

There is a wide range of padlock prices. What is the advantage of the more expensive ones?

They are heavier, more durable and will provide greater security.

Doors

Click here for info on how to install hinges

Do you have a hinge that will fit my door?

The best option is to bring the old hinge in. But as a standard, an exterior door uses a hinge that is 4" long with four holes on each side. An interior door usually has a hinge that is 3-1/2" long and has three holes on each side.

Can I replace the spring on my garage door?

There are two types of systems - tension and non-tension. Tension springs have the spring in the center and a large iron roller in the middle. Because is there is so much torque, most people hire a professional to work on these. The other type has the springs on the side of the door.

Which spring fits my garage door?

You need to know the size of the door and the number of panels. Information on the replacement spring packaging will indicate which spring is needed.

How can I square up my wooden screen door? It is rubbing on the sill.

A screen door turnbuckle, applied diagonally, will raise the sagging edge.

Screens

Should I use fiberglass or aluminum screening?

Aluminum screening is more durable. It's also fireproof. However, fiberglass doesn't dent. Fiberglass is also easier to work with, but it may need to be restretched after it has been installed. 
We have a super durable pet screen available.

I have a hole in my screen. Can I repair it or do I need to replace it?

You can patch small holes-those 1/4" and 3/8"-with a small amount of household cement. This glue patch will be next to invisible. Larger holes up to about 3" in diameter in aluminum screen can usually be easily patched. A patch should go at least 1/2" to 1" larger all around the hole. These are either kits or just pieces of screen. Unravel a number of strands and then weave the strands through the screening and bend them tight. Plastic patches need a touch of household cement on the ends of the strands after they have been woven through.

We can rescreen a door or window screen for you, repair the frame or make one from scratch.